hydraulic baler

Short Description:


Product Detail

Product Tags

Hydraulic Baler

This machine is mainly composed of frame, pressure plate, oil cylinder, oil pump unit, oil tank, electrical box and so on.

When the machine is in operation, the pressure oil supplied by the oil pump unit is limited by the safety valve and enters the manual directional valve. When the manual directional valve works in the left position, the pressure oil enters the upper chamber of the cylinder, and the pressure plate moves downward through the piston and the piston rod. The oil in the lower chamber of the cylinder flows back to the oil tank through the directional valve. When the manual directional valve works in the neutral position, the cylinder The oil in the upper and lower chambers is blocked by the directional valve. The pressure plate can hold the pressure and stay at any position. The oil pump is unloaded through the directional valve. When the manual directional valve works in the right position, the pressure oil enters the lower chamber of the cylinder to push the pressure plate to move. The oil in the upper chamber of the oil cylinder flows back to the oil tank through the reversing valve.

There is a middle device on the upper end of the cylinder, which can reduce the impact when the pressure runs to the upper limit position.

Basic technical parameters

Nominal pressure  80KN
Working stroke  700mm
Downward speed of pressing plate  ≥35mm/s
Traveling speed on pressure plate  ≥ 50mm/s
Machine packaging size (length × width × height)  3700x2450×1250mm
Product packaging size (length × width × height)  2000x1000×1000mm
Working pressure of hydraulic system  5MPa
Hydraulic oil  3 2#
Hydraulic oil  120KG
Installed power  7.5Kw

  • Previous:
  • Next:

  • Write your message here and send it to us